KM1-serie

Kenmerken

Multi-circuit Smart Power Monitor voor backpanel-toepassing

Met het KM1-platform kan het stroomverbruik voor backpanel-toepassingen worden gevisualiseerd via een master-slave-concept. Er kunnen tot vier slave-units worden aangesloten op een master-unit voor gelijktijdige meting van elektrische en niet-elektrische parameters.

  • Aanzienlijk kortere installatietijd.
  • Tot 24% minder montageruimte in vergelijking met traditionele bewakingsproducten.
  • Minder apparaten: met één platform kunnen tot 36 circuits worden gemeten.
  • Minder bedrading dankzij snelle Innerbus-communicatie en de voedingsspanning vanaf de master.
  • Aanpasbaar platform voor elke toepassing
  • Geïntegreerde energieclassificatie dankzij aanpasbare interne drempels
  • Zeer nauwkeurige metingen zelfs voor stroomwaarden lager dan 5% van de nominale waarde.
  • Geen VT vereist / maximaal 7 pulsingangen beschikbaar om ook niet-elektrische gegevens te verzamelen
  • Voorzien van temperatuuringang
  • Instellingen van gratis configuratietool KM/KE1
  • Dubbele systeembewaking met één unit
Specificaties & bestelinfo

Ordering information

Smart power monitors

Unit type

Unit category

Power supply voltage

Communications

Order code

Dual power system measurement unit

Measurement master

100 to 240 VAC

RS-485

KM1-PMU2A-FLK

Power measurement unit

KM1-PMU1A-FLK

Pulse/temperature input unit

Function slave

KM1-EMU8A-FLK

CT extension unit

CT extension slave

Power supplied from the measurement master unit

-

KE1-CTD8E

DeviceNet communications unit

Communications slave

100 to 240 VAC

RS-485 or DeviceNet

KE1-DRT-FLK

Options (Order separately)

Separate or In-panel current transformer (CT)

Rated primary current

Rated secondary current

Installation

Order code

5 A

Special output

Installed separately

KM20-CTF-5A

50 A

KM20-CTF-50A

100 A

KM20-CTF-100A

200 A

KM20-CTF-200A

400 A

KM20-CTF-400A

600 A

KM20-CTF-600A

5 A/50 A

In-panel (penetration type)

KM20-CTB-5A/50A

Note: CT cables are not included with the CTs.

Current transformer (CT) cable

Specification

Order code

3-m cable

KM20-CTF-CB3

Note: Use the CT cable specified by OMRON or one manufactured by JST Mfg. Co.
You can also use a 1.25-B3A crimping terminal or AWG22 power cable.

Related devices (Sold separately)

Communications interface converter

Dimensions (mm)

Communications conversion

Power supply voltage

Order code

30 × 80 × 78 (W×H×D)

RS-232C, USB <-> Half-duplex RS-485

100 to 240 VAC

K3SC-10 AC100-240

24 VAC/DC

K3SC-10 AC/DC24

Specifications

Ratings

Item

Master unit

Slave unit

KM1-PMU2A-FLK

(Dual power systems)

KM1-PMU1A-FLK

(Single power system)

KM1-EMU8A-FLK

(Pulses/temperatures)

KE1-CTD8E

(CT extension unit)

Applicable phase wiring method

Single-phase two wire, single-phase three wire and three-phase three wire

Single-phase two wire, single-phase three wire, three-phase three wire and three-phase four wire

-

Single-phase two wire, single-phase three wire, three-phase three wire and three-phase four wire

Maximum number of CT connections

4

3

-

8

Selectable types of CT capacities

2 types

1 type

-

Two types per Slave Unit

Power supply

Rated power supply voltage

100 to 240 VAC, 50/60 Hz

-

Allowable supply voltage range

85% to 110% of rated power supply voltage

-

Power supply allowable frequency range

45 to 65 Hz

-

Power consumption

Standalone: 10 VA max., Maximum expansion: 14 VA max.

10 VA max.

-

Input

Rated input voltage

100 to 480 VAC

(single-phase, 2-wire): Line voltage

100/200 VAC

(single-phase, 3-wire): Phase voltage/line voltage

100 to 480 VAC

(3-phase, 3-wire): Line voltage

100 to 480 VAC

(single-phase, 2-wire): Line voltage

100/200 VAC

(single-phase, 3-wire): Phase voltage/line voltage

100 to 480 VAC

(3-phase, 3-wire): Line voltage

58 to 277 VAC

(3-phase, 4-wire): Phase voltage

-

Rated input current (CT)

(5, 50, 100, 200, 400, or 600 A)

-

(5, 50, 100, 200, 400, or 600 A)

Rated input power

With 5-A CT: 4 kW

With 50-A CT: 40 kW

With 100-A CT: 80 kW

With 200-A CT: 160 kW

With 400-A CT: 320 kW

With 600-A CT: 480 kW

-

Rated input frequency

50/60 Hz

-

Allowable input frequency range

45 to 65 Hz

-

Allowable input voltage

110% of rated input voltage (continuous)

-

Allowable input current

120% of rated input current (continuous)

-

120% of rated input current (continuous)

Ambient operating temperature

−10 to 55°C (with no condensation or icing)

Storage temperature

−25 to 65°C (with no condensation or icing)

Ambient operating humidity

25% to 85%

Storage humidity

25% to 85%

Altitude

2,000 m max.

Performance

Item

Master unit

Slave unit

KM1-PMU2A-FLK

(Dual power systems)

KM1-PMU1A-FLK

(Single power system)

KM1-EMU8A-FLK

(Pulses/temperatures)

KE1-CTD8E

(CT extension unit)

Accuracy1

Voltage

±1.0% FS, ±1 digit; or, ±2.0% FS, ±1 digit for voltage across Vtr under the same conditions

-

Current

±1.0% FS, ±1 digit

However, the accuracy is ±2.0% FS, ±1 digit for the phase-S current for a three-phase, three wire circuit and the phase-N current for a single-phase, three wire circuit under the same conditions.

-

±1.0% FS, ±1 digit

However, the accuracy is ±2.0% FS, ±1 digit for the phase-S current for a three-phase, three wire circuit and the phase-N current for a single-phase, three wire circuit under the same conditions.

Power (active power and reactive power)

Active power and reactive power

±2.0% FS, ±1 digit (Power factor = 1)

-

Active power and reactive power

±2.0% FS, ±1 digit (Power factor = 1)

Frequency

±0.3 Hz ±1 digit

-

Power factor2

±5.0% FS at an ambient temperature of 23° C, rated input, rated frequency, and a power factor of 0.5 to 1 to 0.5

-

±5.0% FS at an ambient temperature of 23° C, rated input, rated frequency, and a power factor of 0.5 to 1 to 0.5

Temperature

-

±5°C two hours after the power supply is turned ON (after performing any adjustments for the ambient temperature)

-

RS-485

Protocols

Communications protocol setting: Compoway/F or Modbus

Sync method

Start-stop

Node number setting

CompoWay/F: 0 to 99, Modbus:1 to 99

When a switch operation is performed to set the protocol to Modbus when the node number is set to 0, the node number is automatically changed to 1.

Baud rate

9,600 bps, 19,200 bps, or 38,400 bps

Transmission code

CompoWay/F: ASCII, Modbus: Binary

Data length3

CompoWay/F: 7 bits, 8 bits; Modbus: 8 bits

Stop bits3

CompoWay/F: 1 bits or 2 bits; Modbus: 1 bit with priority, 2 bits without priority

Parity

Even, odd, or none

Maximum transmission distance

500 m

Maximum number of nodes

CompoWay/F: 31, Modbus: 99

Communication items

Refer to the relevant communication specification manuals

USB

USB 1.1 compatible

Special CTs
Current Transformer (CT) Cable

Configuration

Installed separately

In-panel
(penetration type)

Model

KM20-CTF-5A

KM20-CTF-50A

KM20-CTF-100A

KM20-CTF-200A

KM20-CTF-400A

KM20-CTF-600A

KM20-CTB-5A/50A

Rated primary current

5 A

50 A

100 A

200 A

400 A

600 A

5 A/50 A

Rated secondary current

1.67 mA

1.67 mA

33.3 mA

66.7 mA

66.7 mA

66.7 mA

1.67 mA/16.7 mA

Secondary winding

3,000 turns

6,000 turns

9,000 turns

3,000 turns

Applicable frequency

10 Hz to 5 kHz

Insulation resistance

Between output terminals and case: 50 MΩ min. (at 500 VDC)

Dielectric strength

Between output terminals and case: 2,000 VAC for 1 minute

Protective element

7.5-V clamp element

Allowable number of connections/disconnections

100 times

Inner diameter (mm)

10

16

24

37

10

Operating temperature and humidity ranges

−20 to 60° C, 85% max. (with no condensation)

Storage temperature and humidity ranges

−30 to 65° C, 85% max. (with no condensation)

KM-series Power monitor models

Series name

KM1 Series

Model

KM1-PMU_A-FLK

KE1-CTD8E

KM1-EMU8A-FLK

Dimensions (mm)

45 × 96 × 90 (W×H×D)

(maximum width of 45 × 5 when five Units are linked together)

Applicable phase wiring method

Single-phase, two wire

OK

OK

-

Single-phase, three wire

OK

OK

-

Three-phase, three wire

OK

OK

-

Three-phase, four wire

PMU1A only

OK

-

400-V direct measurement

OK

-

-

Power Monitor power supply

100 to 240 VAC

Provided from the Master Unit

100 to 240 VAC

Measured items

Total power consumption

OK

OK

-

Active power

OK

OK

-

Instantaneous reactive power

OK

OK

-

Current

OK

OK

-

Voltage

OK

-

-

Power factor

OK

OK

-

Frequency

OK

-

-

Pulse count

-

-

OK (Can be changed with event input.)

Temperature

-

-

OK

KE1-DRT-FLK DeviceNet communications unit

Item

Specification

Communications

  • Remote I/O communications (I/O assignment settings with simple assignment settings or the Configurator)
  • Message communications

Connection configuration

Can be a combination of multidrops and T-branching (for both main and branch lines).

Baud rate

500, 250, or 125 kbps (automatically detected)

Rated primary current

5 dedicated lines (2 signal lines, 2 power lines, and 1 shield)

Communications distance

Baud rate

Maximum network length4

Branch line length

Total for all branch lines

500 kbps

100 m max. (100 m max.)

6 m max.

39 m max.

250 kbps

250 m max. (100 m max.)

6 m max.

78 m max.

125 kbps

500 m max. (100 m max.)

6 m max.

156 m max.

 


1. Based on JISC1111, without special CT error, at ambient temperature of 23° C, rated input, and rated frequency. Applicable to 2nd, 3rd, 5th, 7th, 9th, 11th, and 13th harmonics.

2. Power factor formula: Power factor = Active power/Apparent power

3. The set value may change when the protocol is changed to Modbus. Check the set values if you change the DIP switch settings.

4. Numbers in parentheses are the lengths for thin cable.

1. Based on JISC1111, without special CT error, at ambient temperature of 23° C, rated input, and rated frequency. Applicable to 2nd, 3rd, 5th, 7th, 9th, 11th, and 13th harmonics.

2. Power factor formula: Power factor = Active power/Apparent power

3. The set value may change when the protocol is changed to Modbus. Check the set values if you change the DIP switch settings.

4. Numbers in parentheses are the lengths for thin cable.

Downloads

Brochures

Toon alle brochures

Handleidingen

Toon alle handleidingen

Softwaretools

download

EasyKM-Manager Software

en ZIP 9,54 MB
o

Hier of direct toegang krijgen om dit document te downloaden

download

KM-KE setting Software

en ZIP 5,39 MB
o

Hier of direct toegang krijgen om dit document te downloaden

Toon alle softwaretools

Abonneer u op productupdates

Nieuwsbrieven over productinnovaties, oplossingen en ondersteuning, direct in uw inbox

Dank u wel voor uw aanmelding voor Omrons eNews. Binnenkort ontvangt u een e-mail van ons. Deze e-mail bevat een link die uw aanmelding voor toezending van onze eNews activeert. Deze methode hanteren wij om te voldoen aan wettelijke voorschriften alsmede om er zeker van te zijn dat niemand uw e-mailadres misbruikt.

Wij ondervinden technische problemen. Uw formulierinzending is niet gelukt. Onze verontschuldigingen hiervoor, probeer het later nog een keer. Details: [details]

Download

Productdocumentatie

Download datasheets, manuals en brochures.

Browse downloadcentrum

Trainingen

Volg een training bij onze beste technische specialisten. Van beginner tot gevorderd niveau.

Bekijk onze trainingen