CJ1W-MD232
CJ I/O, 16 in, NPN/PNP 24 VDC schakelvertraging instelbaar, 16 uit, transistor PNP, 24 VDC/0,5 A, kortsluitvast, met 2 x 20 punts MIL aansluiting
Specificaties
| I/O system | CJ I/O Bus |
| Expansion unit type | Basic I/O Unit |
| Type of module | Digital I/O |
| Number of digital inputs | 16 |
| Digital input type | PNP/NPN |
| Permitted voltage at input | 20.4-26.4 V |
| OFF/ON delay | 0-32 ms |
| Number of digital outputs | 16 |
| Digital output type | PNP |
| Permitted voltage at output | 10.2-26.4 V |
| Output current | 0.5 A |
| Short-circuit protected outputs | |
| I/O connection type | MIL (plug not included) |
| Number of I/O connectors | 2 |
| Detachable I/O connector | |
| Suitable for safety functions | |
| Number of IOV (V+) terminals | 2 |
| Number of IOG (V-) terminals | 2 |
| Number of COM terminals | 2 |
| Product Height (unpacked) | 90 mm |
| Product Width (unpacked) | 31 mm |
| Product Depth (unpacked) | 83.6 mm |
| Product Weight (unpacked) | 100 g |
Accessoires
| G70A-ZOC16-4 DC24 | 16 uit, relais block 24 VDC PNP gestuurd. In combinatie met PNP PLC uitgangsmodule, CompoBus/S of DeviceNet interface, relais los bijbestellen (G2R-1-SN 24DC) met 20 punts MIL connector |
|
|
| G70V-SID16P | Omron, G70V I/O-relaisterminal, PLC Input, 16 wisselcontacten, 50 mA, NPN, Push-in Plus (incl. Relais) |
|
|
| G70V-SID16P-1 | Omron, G70V I/O-relaisterminal, PLC Input, 16 wisselcontacten, 50 mA, PNP, Push-in Plus (incl. Relais) |
|
|
| G70V-SOC16P-1 | Omron, G70V I/O-relaisterminal, PLC Output, 16 wisselcontacten, 2 - 6 A, PNP, Push-in Plus (incl. Relais) |
|
|
| XW2D-20G6 | Slimline 20 punts klemmenstrook voor DIN-railmontage M3, 20 punts MIL connector |
|
|
| XW2K-20G-T | Interfacebedradingssysteem voor algemeen gebruik met push-in plus-technologie, 20-punts MIL-connector, ingang/uitgang, 1 A, NPN/PNP, 125 VAC, 30 VDC, DIN-rail horizontale en verticale montage |
|
|
| XW2Z-0100DD-L | I/O kabel, 1 m, MIL20 naar MIL20, recht over |
|
|
| XW2Z-0100DL-L | I/O kabel, 1 m, MIL20 naar open einden |
|
|
| XW2Z-0200DD-L | I/O kabel, 2 m, MIL20 naar MIL20, recht over |
|
|
| XW2Z-0200DL-L | I/O kabel, 2 m, MIL20 naar open einden |
|
|
| XW2Z-0500DL-L | I/O kabel, 5 m, MIL20 naar open einden |
|
|
| XW2Z-100X | 1 m kabel tussen klemmenstrook XW2B-20G4/G5 en CJ1W-NCx14 / x34 |
|
|
| XW2Z-200X | 2 m kabel tussen klemmenstrook XW2B-20G4/G5 en CJ1W-NCx14 / x34 |
|
Downloads
