Power rating
|
30 W
|
60 W
|
Rated output voltage
|
5 V
|
12 V
|
24 V
|
Indication monitor
|
None
|
None
|
None
|
Efficiency
|
115 VAC input
|
78% typ.
|
85% typ.
|
85% typ.
|
230 VAC input
|
77% typ.
|
86% typ.
|
86% typ.
|
Input conditions
|
Voltage range
|
Single-phase, 85 to 264 VAC, 90 to 350 VDC, 265 to 300 VAC (1 second)
|
Frequency
|
50/60 Hz (47 to 450 Hz)
|
Input current
|
115 VAC input
|
0.53 A typ.
|
0.99 A typ.
|
1.1 A typ.
|
230 VAC input
|
0.32 A typ.
|
0.61 A typ.
|
0.67 A typ.
|
Power factor
|
−
|
Leakage current
|
115 VAC input
|
0.5 mA max.
|
230 VAC input
|
1 mA max.
|
Inrush current
|
115 VAC input
|
16 A typ.
|
230 VAC input
|
32 A typ.
|
Output characteristics
|
Rated output current
|
5 A
|
4.5 A
|
2.5 A
|
Rated output power
|
25 W
|
54 W
|
60 W
|
Maximum boost current
|
6 A
|
5.4 A
|
3 A
|
Voltage adjustment range
|
4.5 to 5.8V (with V. ADJ)
|
10.8 to 14 V (with V. ADJ)
|
21.6 to 28 V (with V. ADJ)
|
Ripple noise voltage
|
100 to 240 VAC input
|
130 mVp-p max.
at 20 MHz of bandwidth
|
120 mVp-p max.
at 20 MHz of bandwidth
|
110 mVp-p max.
at 20 MHz of bandwidth
|
Input variation influence
|
0.5% max.
|
Load variation influence
|
1.5% max.
|
Temperature variation influence
|
100 to 240 VAC input
|
0.05%/°C max.
|
Start up time
|
115 VAC input
|
1000 ms max.
|
1000 ms max.
|
1000 ms max.
|
230 VAC input
|
1000 ms max.
|
1000 ms max.
|
1000 ms max.
|
Hold time
|
115 VAC input
|
45 ms typ.
|
20 ms typ.
|
20 ms typ.
|
230 VAC input
|
240 ms typ.
|
120 ms typ.
|
110 ms typ.
|
Additional functions
|
Overload protection
|
Yes, automatic reset, intermittent operation type.
|
Overvoltage protection
|
Yes, 130% or higher of rated output voltage, power shut off (shut off the input voltage and turn on the input again).
|
Series operation
|
Yes (For up to two Power Supplies; external diodes required.)
|
Parallel operation
|
Yes (For up to two Power Supplies).
|
Output indicator
|
Yes (LED: Green)
|
Alarm indicator
|
Yes (LED: Red)
|
Indication monitor
|
Measurement and display details
|
Refer to datasheet.
|
Main display
|
None
|
Ethernet communication
|
Measurement and display details
|
Refer to datasheet.
|
Communication protocol
|
EtherNet/IP, Modbus TCP
|
Physical layer
|
100BASE-TX
|
Communication specifications
|
Refer to datasheet.
|
Insulation
|
Withstand voltage
|
3.0 kVAC for 1 min. (between all input terminals and output terminals, all EtherNet/IP ports), current cutoff 20 mA
|
2.0 kVAC for 1 min. (between all input terminals and PE terminals), current cutoff 20 mA
|
1.0 kVAC for 1 min. (between all output terminals and PE terminals), current cutoff 30 mA
|
0.5 kVAC for 1 min. (between all output terminals and all EtherNet/IP ports), current cutoff 30 mA
|
Insulation resistance
|
100 MΩ min. (between all output terminals and all input terminals/PE terminals) at 500 VDC
|
100 MΩ min. (between all EtherNet/IP ports and all input terminals) at 500 VDC
|
Environment
|
Ambient operating temperature
|
−40 to 70°C (Derating is required according to the temperature.) (with no condensation or icing)
|
Storage temperature
|
−40 to 85°C (with no condensation or icing)
|
Ambient operating humidity
|
95% max. (Storage humidity: 95% max.)
|
Vibration resistance
|
10 to 55 Hz, maximum 5 G, 0.42 mm half amplitude for 2 h each in X, Y, and Z directions
|
Shock resistance
|
150 m/s2, 3 times each in ±X, ±Y, ±Z directions
|
Reliability
|
MTBF
|
160,000 hrs typ.
|
Life expectancy
|
10 years min.
|
Construction
|
Weight
|
250 g max.
|
250 g max.
|
250 g max.
|
Cooling fan
|
No
|
Degree of protection
|
IP20 by EN/IEC 60529
|
Power rating
|
90 W
|
120 W
|
Rated output voltage
|
24 V
|
24 V
|
Indication monitor
|
Included
|
None
|
Included
|
None
|
Efficiency
|
115 VAC input
|
86% typ.
|
87% typ.
|
90% typ.
|
90% typ.
|
230 VAC input
|
87% typ.
|
88% typ.
|
92% typ.
|
92% typ.
|
Input conditions
|
Voltage range
|
Single-phase, 85 to 264 VAC, 90 to 350 VDC, 265 to 300 VAC (1 second)
|
Frequency
|
50/60 Hz (47 to 450 Hz)
|
50/60 Hz (47 to 63 Hz)
|
Input current
|
115 VAC input
|
1.7 A typ.
|
1.7 A typ.
|
1.2 A typ.
|
1.2 A typ.
|
230 VAC input
|
1.0 A typ.
|
1.0 A typ.
|
0.63 A typ.
|
0.63 A typ.
|
Power factor
|
−
|
0.9 min.
|
Leakage current
|
115 VAC input
|
0.5 mA max.
|
230 VAC input
|
1 mA max.
|
Inrush current
|
115 VAC input
|
16 A typ.
|
230 VAC input
|
32 A typ.
|
Output characteristics
|
Rated output current
|
3.75 A
|
5 A
|
Rated output power
|
90 W
|
120 W
|
Maximum boost current
|
−
|
6 A
|
Voltage adjustment range
|
23.0 to 24.1 V
|
21.6 to 28 V (with V. ADJ)
|
Ripple noise voltage
|
100 to 240 VAC input
|
300 mVp-p max. at 20 MHz of bandwidth
|
150 mVp-p max. at 20 MHz of bandwidth
|
Input variation influence
|
0.5% max.
|
Load variation influence
|
1.5% max.
|
Temperature variation influence
|
100 to 240 VAC input
|
0.05%/°C max.
|
Start up time
|
115 VAC input
|
1000 ms max.
|
1000 ms max.
|
230 VAC input
|
1000 ms max.
|
1000 ms max.
|
Hold time
|
115 VAC input
|
25 ms typ.
|
35 ms typ.
|
230 VAC input
|
130 ms typ.
|
35 ms typ.
|
Additional functions
|
Overload protection
|
Yes, automatic reset, intermittent operation type.
|
Overvoltage protection
|
Yes, 110% or higher of rated output voltage (90 W), 130% or higher of rated output voltage (120 W), power shut off (shut off the input voltage and turn on the input again.
|
Series operation
|
Yes (For up to two Power Supplies, external diodes are required.)
|
Parallel operation
|
Yes (For up to two Power Supplies).
|
Output indicator
|
Yes (LED: Green)
|
Alarm indicator
|
Yes (LED: Red)
|
Indication monitor
|
Measurement and display details
|
Refer to datasheet.
|
Main display
|
7-segment LED
(White)
|
None
|
7-segment LED
(White)
|
None
|
Ethernet communication
|
Measurement and display details
|
Refer to datasheet.
|
Communication protocol
|
EtherNet/IP, Modbus TCP
|
Physical layer
|
100BASE-TX
|
Communication specifications
|
Refer to datasheet.
|
Insulation
|
Withstand voltage
|
3.0 kVAC for 1 min. (between all input terminals and output terminals, all EtherNet/IP ports), current cutoff 20 mA
|
2.0 kVAC for 1 min. (between all input terminals and PE terminals), current cutoff 20 mA
|
1.0 kVAC for 1 min. (between all output terminals and PE terminals), current cutoff 30 mA
|
0.5 kVAC for 1 min. (between all output terminals and all EtherNet/IP ports), current cutoff 30 mA
|
Insulation resistance
|
100 MΩ min. (between all output terminals and all input terminals/PE terminals) at 500 VDC
|
100 MΩ min. (between all EtherNet/IP ports and all input terminals) at 500 VDC
|
Environment
|
Ambient operating temperature
|
−40 to 70°C (Derating is required according to the temperature.) (with no condensation or icing)
|
Storage temperature
|
−40 to 85°C (with no condensation or icing)
|
Ambient operating humidity
|
95% max. (Storage humidity: 95% max.)
|
Vibration resistance
|
10 to 55 Hz, maximum 5 G, 0.42 mm half amplitude for 2 h each in X, Y, and Z directions
|
Shock resistance
|
150 m/s2, 3 times each in ±X, ±Y, ±Z directions
|
Reliability
|
MTBF
|
110,000 hrs typ.
|
150,000 hrs typ.
|
110,000 hrs typ.
|
140,000 hrs typ.
|
Life expectancy
|
10 years min.
|
Construction
|
Weight
|
350 g max.
|
400 g max.
|
Cooling fan
|
No
|
Degree of protection
|
IP20 by EN/IEC 60529
|
Power rating
|
240 W
|
480 W
|
Rated output voltage
|
24 V
|
24 V
|
Indication monitor
|
Included
|
None
|
Included
|
None
|
Efficiency
|
115 VAC input
|
91% typ.
|
91% typ.
|
92% typ.
|
92% typ.
|
230 VAC input
|
93% typ.
|
93% typ.
|
94% typ.
|
94% typ.
|
Input conditions
|
Voltage range
|
Single-phase, 85 to 264 VAC, 90 to 350 VDC, 265 to 300 VAC (1 second)
|
Frequency
|
50/60 Hz (47 to 63 Hz)
|
50/60 Hz (47 to 63 Hz)
|
Input current
|
115 VAC input
|
2.4 A typ.
|
2.4 A typ.
|
4.6 A typ.
|
4.6 A typ.
|
230 VAC input
|
1.2 A typ.
|
1.2 A typ.
|
2.3 A typ.
|
2.3 A typ.
|
Power factor
|
0.9 min.
|
Leakage current
|
115 VAC input
|
0.5 mA max.
|
230 VAC input
|
1 mA max.
|
Inrush current
|
115 VAC input
|
16 A typ.
|
230 VAC input
|
32 A typ.
|
Output characteristics
|
Rated output current
|
10 A
|
20 A
|
Rated output power
|
240 W
|
480 W
|
Maximum boost current
|
15 A
|
30 A
|
Voltage adjustment range
|
21.6 to 28 V (with V. ADJ)
|
Ripple noise voltage
|
100 to 240 VAC input
|
140 mVp-p max. at 20 MHz of bandwidth
|
130 mVp-p max. at 20 MHz of bandwidth
|
Input variation influence
|
0.5% max.
|
Load variation influence
|
1.5% max.
|
Temperature variation influence
|
100 to 240 VAC input
|
0.05%/°C max.
|
Start up time
|
115 VAC input
|
1000 ms max.
|
1000 ms max.
|
230 VAC input
|
1000 ms max.
|
1000 ms max.
|
Hold time
|
115 VAC input
|
35 ms typ.
|
25 ms typ.
|
230 VAC input
|
35 ms typ.
|
25 ms typ.
|
Additional functions
|
Overload protection
|
Yes, automatic reset, intermittent operation type.
|
Overvoltage protection
|
Yes, 130% or higher of rated output voltage, power shut off (shut off the input voltage and turn on the input again).
|
Series operation
|
Yes (For up to two Power Supplies; external diodes required.)
|
Parallel operation
|
Yes (For up to two Power Supplies)
|
Output indicator
|
Yes (LED: Green)
|
Alarm indicator
|
Yes (LED: Red)
|
Indication monitor
|
Measurement and display details
|
Refer to datasheet.
|
Main display
|
7-segment LED (White)
|
None
|
7-segment LED (White)
|
None
|
Ethernet communication
|
Measurement and display details
|
Refer to datasheet.
|
Communication protocol
|
EtherNet/IP, Modbus TCP
|
Physical layer
|
100BASE-TX
|
Communication specifications
|
Refer to datasheet.
|
Insulation
|
Withstand voltage
|
3.0 kVAC for 1 min. (between all input terminals and output terminals, all EtherNet/IP ports),
|
2.0 kVAC for 1 min. (between all input terminals and PE terminals), current cutoff 20 mA
|
1.0 kVAC for 1 min. (between all output terminals and PE terminals), current cutoff 30 mA
|
0.5 kVAC for 1 min. (between all output terminals and all EtherNet/IP ports), current cutoff 30 mA
|
Insulation resistance
|
100 MΩ min. (between all output terminals and all input terminals/PE terminals) at 500 VDC
|
100 MΩ min. (between all EtherNet/IP ports and all input terminals) at 500 VDC
|
Environment
|
Ambient operating temperature
|
−40 to 70°C (Derating is required according to the temperature.) (with no condensation or icing)
|
Storage temperature
|
−40 to 85°C (with no condensation or icing)
|
Ambient operating humidity
|
95% max. (Storage humidity: 95% max.)
|
Vibration resistance
|
10 to 55 Hz, maximum 5 G, 0.42 mm half amplitude for 2 h each in X, Y, and Z directions
|
Shock resistance
|
150 m/s2, 3 times each in ±X, ±Y, ±Z directions
|
Reliability
|
MTBF
|
100,000 hrs typ.
|
130,000 hrs typ.
|
90,000 hrs typ.
|
120,000 hrs typ.
|
Life expectancy
|
10 years min.
|
Construction
|
Weight
|
700 g max.
|
1,100 g max.
|
Cooling fan
|
No
|
Degree of protection
|
IP20 by EN/IEC 60529
|
Standards
|
Harmonic current emissions
|
Conforms to EN 61000-3-2
|
EMI
|
Conducted emissions
|
Conforms to EN 61204-3 Class B, EN 55011 Class B
|
Radiated emissions
|
Conforms to EN 61204-3 Class B, EN 55011 Class B
|
EMS
|
Conforms to EN 61204-3 high severity levels
|
Safety standards
|
UL 508, ANSI/ISA 12.12.01 (Listing) (For 30 W, 60 W, and 90 W only Class 2 Output: Per UL 1310)
CSA C22.2 No. 107.1, CSA C22.2 No. 213 (cUL) (For 30 W, 60 W, and 90 W only Class 2 Output: Per CSA C22.2 No. 223)
UL 60950-1, UL 62368-1 (Recognition) OVC II (
≤
3000 m) Pol2 (For 30 W, 60 W, and 90 W only LPS)
CSA C22.2 No. 60950-1, No. 62368-1 (cUR) OVC II (
≤
3000 m) Pol2 (For 30 W, 60 W, and 90 W only LPS)
EN 50178 OVC III (
≤
2000 m) OVC II (2000 m < and
≤
3000 m) Pol2
EN 60950-1, EN 62368-1 OVC II (
≤
3000 m) Pol2 (For 30 W, 60 W, and 90 W only LPS)
EAC (TR CU 004 / 2011, TR CU 020 / 2011)
RCM (EN61000-6-4)
Korea Radio Waves Act (Law No. 10564)
Conforms to PELV (EN/IEC 60204-1)
Conforms to EN/IEC 61558-2-16
|
SEMI
|
Conforms to F47-0706 (200 to 240 VAC input)
|