ZX2

Kenmerken

Stabiele, eenvoudige en betaalbare lasermeetsensor

Hoge nauwkeurigheid en meetstabiliteit, tegen een betaalbare prijs. De nieuwe ZX2-lasersensor levert topprestaties op het gebied van nauwkeurigheid en snelheid bij alle lineaire verplaatsingen. Met een geavanceerde HSDR-CMOS-beeldsensor wordt een hoge meetstabiliteit bereikt, zelfs op de moeilijkste oppervlakken.

  • Met één toets instelbaar
  • Nauwkeurigheid: 1,5–5 µm
  • Elk oppervlak
  • Hoge snelheid: 30 µs

HSDR CMOS-beeldsensor

ZX2_CMOS.jpg
De ZX2 maakt gebruik van een nieuw ontwikkelde High Speed & Dynamic Range (HSDR) CMOS-beeldsensor. Die zorgt voor stabiele metingen zonder verlies van nauwkeurigheid op sterk absorberende of sterk reflecterende oppervlakken. De ZX2 bewaakt het ontvangen lichtniveau continu en stelt het uitgangssignaal van de laserdiode af voor compensatie. Dit alles vindt plaats binnen een cyclustijd van 60 μs.

Eenvoudige instelling

ZX2_Smart button.jpg
Met de ZX2 is een ingewikkelde instelprocedure door het afstellen van vele parameters niet nodig. Met een intelligente knop kan de sensor worden geconfigureerd door het type oppervlak voor de meting te definiëren.  
  • Eén type oppervlak
  • Meerdere oppervlaktypes
  • Sterk reflecterende oppervlakken
Alle overige instellingen worden automatisch geconfigureerd op basis van deze instelling.

Toepassingen

ZX2_App_double sheet.jpg

Detectie met dubbele sheets

Dankzij de grote meetnauwkeurigheid en omdat hij geschikt is voor diverse oppervlaktypes, kan de ZX2 worden toegepast bij inspecties met dubbele sheets.
ZX2_App_robot.jpg

Positiereferentiemetingen

Omdat met de ZX2 met hoge snelheid nauwkeurige lengtemetingen kunnen worden uitgevoerd, kan hij worden ingezet voor snelle positiereferentiemetingen.
ZX2_App_thickness.jpg

Diktemetingen

Met de berekeningseenheid in de ZX2 kunnen eenvoudig diktemetingen worden uitgevoerd. Zelfs op sterk reflecterende oppervlakken kunnen nauwkeurige diktemetingen worden uitgevoerd.
ZX2_App_warpage.jpg

Meting van vervormingen

Bij gebruik van meerdere ZX2-units kunnen de vervorming of doorbuiging van componenten worden gecontroleerd. Zelfs wanneer de temperatuur of het meetoppervlak varieert, kunnen er nog stabiele metingen worden uitgevoerd.
Specificaties & bestelinfo

Ordering information

Sensor heads

Optical system

Beam shape

Sensing distance

Resolution

Order code

Diffuse-reflective

Line beam

 

1.5 µm

ZX2-LD50L

Spot beam

ZX2-LD50

Line beam

 

5 µm

ZX2-LD100L

Spot beam

ZX2-LD100

Regular reflective

Spot beam

 

1.5 µm

ZX2-LD50V

Amplifier units

Power supply

Output type

Order code

DC

NPN

ZX2-LDA11

PNP

ZX2-LDA41

Accessories (order separately)

These are not included with the sensor head or amplifier unit.

Please order as necessary.

Calculating unit

 

Order code

Calculating unit

ZX2-CAL

Sensor head extension cables 1

Cable length

Order code

1 m

ZX2-XC1R

4 m

ZX2-XC4R

9 m

ZX2-XC9R

20 m

ZX2-XC20R

Mounting brackets

Applicable Sensor Heads

Appearance

Contents

Order code

ZX2-LD50V

ZX2-LD50L

ZX2-LD50

 

Mounting Bracket: 1

Nut plate: 1

Phillips screws (M3×30): 2

E39-L178

ZX2-LD100L

ZX2-LD100

 

 

E39-L179

Specifications

Diffuse reflective Sensor Heads

Item Model

ZX2-LD50L

ZX2-LD50

ZX2-LD100L

ZX2-LD100

Optical system

Diffuse reflective

Light source (wave length)

Visible-light semiconductor laser with a wavelength of 660 nm and an output of 1 mW max.

EN class 2,FDA class II *5

Measurement center point

50 mm

100 mm

Measurement range

±10 mm

±35 mm

Beam shape

Line

Spot

Line

Spot

Beam size1

Approx. 60 µm×2.6 mm

Approx. 60 µm dia.

Approx.110 µm×2.7 mm

Approx.110 µm dia.

Resolution2

1.5 µm

5 µm

Linearity3

±0.05% F.S. (40 to 50 mm)

±0.1% F.S. (40 to 50 mm)

±0.05%F.S. (65 to 100 mm)

±0.1%F.S. (65 to 100 mm)

±0.1% F.S. (entire range)

±0.15% F.S. (entire range)

±0.1% F.S. (entire range)

±0.15% F.S. (entire range)

Temperature characteristic4

0.02% F.S./°C

Ambient illumination

Incandescent lamp: 10,000 lx max. (on light receiving side)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute.

Vibration resistance (destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 minutes. each in X,Y,and Z directions

Shock resistance (destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC60529, IP67

Connection method

Connector connection (standard cable length: 500 mm)

Weight (packed state)

Approx.160 g (Sensor Head only: Approx.75 g)

Materials

Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Cable: PVC

Accessories

Instruction sheet, Ferrite core, Laser warning label (English), FDA certification label

Regular-reflective Sensor Heads

Item Model

ZX2-LD50V

Optical system

Regular reflective

Light source (wave length)

Visible-light semiconductor laser with a wavelength of 660 nm and an output of 0.24 mW max. EN class 1, FDA class I

Measurement center point

48 mm

Measurement range

±5 mm

Beam shape

Spot

Beam size2

Approx. 60 µm dia.

Resolution3

1.5 µm

Linearity4

±0.3% F.S. (entire range)

Temperature characteristic5

0.06% F.S./°C

Ambient illumination

Incandescent lamp: 10,000 lx max. (on light receiving side)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute.

Vibration resistance (destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 minutes. each in X,Y,and Z directions

Shock resistance (destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC 60529, IP67

Connection method

Connector connection (standard cable length: 500 mm)

Weight (packed state)

Approx.160 g (Sensor Head only: Approx.75 g)

Materials

Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Cable: PVC

Accessories

Instruction sheet, Ferrite core, Laser warning label (English)

Note: False detection outside the measurement range can occur in the case of an object with high reflectance.

Amplifier units

Item

ZX2-LDA11

ZX2-LDA41

Measurement period6

Min 30 μs

Response time

60 µs, 120 µs, 240 µs, 500 µs, 1 ms, 2 ms, 4 ms, 8 ms, 12 ms, 20 ms, 36 ms, 66 ms, 128 ms, 250 ms, 500 ms

Analog output7

4 to 20 mA, Max. load resistance: 300Ω, ±5VDC or 1 to 5 VDC, Output impedance: 100Ω

Judgement outputs (HIGH/PASS/LOW: 3 outputs), error output

NPN open-collector outputs, 30 VDC, 50 mA max.(residual voltage: 1 V max. for load current 10 mA max.,2 V max. for load current above 10 mA)

PNP open-collector outputs, 30 VDC, 50 mA max.(residual voltage: 1 V max. for load current 10 mA max., 2 V max. for load current above 10 mA)

Laser OFF input, zero reset input, timing input, reset input, bank input

ON: Short-circuited with 0-V terminal or 1.5 V or less
OFF: Open (leakage current: 0.1 mA max.)

ON: Supply voltage short-circuited or supply voltage within 1.5 V
OFF: Open (leakage current: 0.1 mA max.)

Functions

Smart tuning, scaling, sample hold, peak hold, bottom hold, peak-to-peak hold, self-peak hold, self-bottom hold, average hold, zero reset, On-delay timer, OFF-delay timer, keep/clamp switch, (A-B)calculations8, thickness calculation3, mutual interference prevention3, laser deterioration detection, bank function (4 banks)

Indications

Judgement indicators: HIGH (orange), PASS (green), LOW (orange), 11-segment main display (red), 11-segmentsub-display (orange), laser ON (green), zero reset (green), enable (green), menu (green), HIGH threshold (orange), LOW threshold (orange)

Power supply voltage

10 to 30 VDC, including 10% ripple(p-p)

Power consumption

3,000 mW max. with power supply voltage of 30 VDC and power supply current of 100 mA (with Sensor connected)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 min.

Vibration resistance
(destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 min. each in X,Y,and Z directions

Shock resistance
(destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC60529, IP40P

Connection method

Prewired (standard cable length: 2 m)

Weight (packed state)

Approx. 200 g (unit only: Approx.135 g)

Materials

Case: PBT(polybutylene terephtahalate), Cover: Polycarbonate, Display: Acrylic resin, Button: Polyacetal, Cable: PVC

Accessories

Instruction sheet

Calculating unit

Item

ZX2-CAL

Applicable amplifier units

ZX2-LDA11/ZX2-LDA41

Current consumption

12 mA max. (supplied from the smart sensor amplifier unit)

Ambient temperature

Operating: 0 to 50°C, storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% RH (with no condensation)

Connection method

Connector

Dielectric strength

1,000 VAC, 50/60 Hz for 1 min

Insulation resistance

100 MΩ (at 500 VDC)

Vibration resistance (destructive)

10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions

Shock resistance (destructive)

300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)

Materials

Case: PBT (polybutylene terephthalate), Display: Acrylic resin

Weight (packed state)

Approx. 50 g

Accessories

Instruction sheet


1. Extension cables cannot be coupled and used together.

2. Beam size: Defined as 1/e 2 (13.5%) of the central intensity at the smallest value of diameter for the measurement range (typical value) False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object.

3. Resolution: indicates the degree of fluctuation (±3σ) of analog output when connected to the ZX2-LDA. (The measured value is given for the center distance for OMRON’s standard target object (diffuse-reflective models: white ceramic object, regular-reflective models: 1/4 λ flat mirror) when the response time of the ZX2-LDA is set to 128 ms.)
Indicates the repetition accuracy for when the workpiece is in a state of rest. Not an indication of distance accuracy. Resolution performance may not be satisfied in a strong electromagnetic field.

4. Linearity: indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’ s standard target object. Linearity and measured value may vary depending on target object. F.S. indicates the full scope of the measurement range. (ZX2-LD50 (L): 20mm)

5. Temperature characteristic: Value for the case the space between the sensor head and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

*5 These Sensors are classified as Class 2 laser devices for diffuse-reflective models and Class 1 for regular-reflective models under EN 606825-1 and the regulations of Laser Notice No. 50 for FDA certification. CDRH registration has been completed for diffuse-reflective models and is scheduled for regular-reflective models.

6. In the case of Omron’s standard target object (white ceramic)

7. Configure current output (4 to 20mA) and voltage output (±5 V or 1 to 5 V) by MENU mode.

8. Calculating unit (ZX2-CAL) is necessary.

1. Extension cables cannot be coupled and used together.

2. Beam size: Defined as 1/e 2 (13.5%) of the central intensity at the smallest value of diameter for the measurement range (typical value) False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object.

3. Resolution: indicates the degree of fluctuation (±3σ) of analog output when connected to the ZX2-LDA. (The measured value is given for the center distance for OMRON’s standard target object (diffuse-reflective models: white ceramic object, regular-reflective models: 1/4 λ flat mirror) when the response time of the ZX2-LDA is set to 128 ms.)
Indicates the repetition accuracy for when the workpiece is in a state of rest. Not an indication of distance accuracy. Resolution performance may not be satisfied in a strong electromagnetic field.

4. Linearity: indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’ s standard target object. Linearity and measured value may vary depending on target object. F.S. indicates the full scope of the measurement range. (ZX2-LD50 (L): 20mm)

5. Temperature characteristic: Value for the case the space between the sensor head and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

*5 These Sensors are classified as Class 2 laser devices for diffuse-reflective models and Class 1 for regular-reflective models under EN 606825-1 and the regulations of Laser Notice No. 50 for FDA certification. CDRH registration has been completed for diffuse-reflective models and is scheduled for regular-reflective models.

6. In the case of Omron’s standard target object (white ceramic)

7. Configure current output (4 to 20mA) and voltage output (±5 V or 1 to 5 V) by MENU mode.

8. Calculating unit (ZX2-CAL) is necessary.

Abonneer u op productupdates

Nieuwsbrieven over productinnovaties, oplossingen en ondersteuning, direct in uw inbox

Dank u wel voor uw aanmelding voor Omrons eNews. Binnenkort ontvangt u een e-mail van ons. Deze e-mail bevat een link die uw aanmelding voor toezending van onze eNews activeert. Deze methode hanteren wij om te voldoen aan wettelijke voorschriften alsmede om er zeker van te zijn dat niemand uw e-mailadres misbruikt.

Wij ondervinden technische problemen. Uw formulierinzending is niet gelukt. Onze verontschuldigingen hiervoor, probeer het later nog een keer. Details: [details]

Download

Productdocumentatie

Download datasheets, manuals en brochures.

Browse downloadcentrum

Trainingen

Volg een training bij onze beste technische specialisten. Van beginner tot gevorderd niveau.

Bekijk onze trainingen